Open Modeling Framework
» Model “
”
New Version
A new version of the model has been added to the OMF. To get the new outputs, please fill in any missing inputs and hit "Run Model". You can also just look at the old inputs/outputs.
Model Input
Model Type
Help?
Model Name
User
Created
Run Time
Grid Parameters
Hourly Load Shape (.csv file)
Please enter the name of a .csv file representing the hourly load shape
Choose File
Latitude
Specify the latitude of the load/grid.
Longitude
Specify the longitude of the load/grid.
Year
Specify the year to which the load shape values corresond.
Cost of Energy ($/kWh)
Specify the energy cost in $/kWh.
Cost of Demand ($/kW)
Specify the demand cost in $/kW.
Generation Technologies
Solar
Include solar in the microgrid design?
Yes
No
Wind
Include wind in the microgrid design?
Yes
No
Battery
Include batteries in the microgrid design?
Yes
No
Solar Cost ($/kW)
Specify the cost in $/kW.
Solar Minimum Power (kW)
Specify the minimum desired generation in kW.
Wind Cost ($/kW)
Specify the cost in $/kW.
Wind Minimum Power (kW)
Specify the minimum desired generation in kW.
Battery Energy Cost ($/kWh)
Specify the cost in $/kWh.
Battery Power Cost ($/kW)
Specify the cost in $/kW.
Battery Minimum Power (kW)
Specify the minimum desired battery capacity in kW.
Battery Minimum Energy (kWh)
Specify the minimum desired battery capacity in kWh.
Resilence
Critical Load Factor
The percent of typical load that must be met during a grid outage.
Pre-existing Generator Size (kW)
Specify the total capacity of any pre-existing generators in kWh.
Available Generator Fuel (gallons)
Specify the amount of fuel available for any pre-existing generators in gallons.
Minimum Generator Loading
The percent of load that must be met by the generator during a grid outage.
Outage Start Hour
A major outage is added starting at this hour.
Outage Duration (hours)
The added major outage is given this duration.
Share
Duplicate
Raw Input and Output Files
resultsResilience.json
—
Scenario_test_POST.json
—
loadShape.csv
—
results.json
—
PPID.txt
—
allInputData.json
—
allOutputData.json